Description
The heating cable is a twisted 3mm twin conductor. The heating cable is terminated with a highly reliable connection to a 3.0m cold tail and is protected by 100% aluminium earth sheath and touch heat resisting non-flammable fluoropolymer which can be used in wet areas. The cable is used for supplement heating and primary heating specially designed for irregular shaped rooms.
The spooled GB heating sections are applied as a supplementary system for comfortable floor heating. In thermal insulated buildings the GB heating sections could be used as a basic heating system when it is impossible to use a central heating system. The ultra-thin GB heating sections are excellently applicable for the installation in a tile adhesive layer or in screed. They can be applied under any covering of your choice: tile, marble or carpet.
- Ideal for irregular shaped rooms
- Full technical support
- 16 year manufacturers warranty
- 100% aluminium earth shield
- Very touch heat resistant fluoropolymer cables
- Only 3mm thick cables
- Only one connection cable
- Largest size range in the UK
Construction
The double-core heating section GB consists of a heating cable with two cores in a foil-coated screening sheath with a protective drainage wire, one coupling, one cold lead (3 m length) and a cable termination. Due to the double-core design of the heating cable, the electric power is supplied only from one end of the section, which makes the installation process easier. The cable insulation is made of tough heat-resisting non-flammable fluoropolymer. The cable shield is made of aluminium foil, Reinforced with a copper line. The GB heating sections are made exclusively of high quality materials produced by world leading manufacturers. The GB heating sections operate in combination with thermostats. Therefore the consuming power of the system will be less than the installed power (up to 70%).
The post WarmFloor Loose Cable Type GB WFS (15W/m) appeared first on Tile Couture.